Cut Anchors

Manufactures cut anchors, drop in anchors, wedge anchors, metal frame anchors, nylon fastening tape in China

Online Catalogue

Made of Steel / Stainless
	Sleeve Anchor Metal Frame Anchor Heavy Duty Shield Anchor Wedge Anchor Hollow Wall Anchor Drop in Anchor Chemical Anchor Metal Hit Anchor Ceiling Anchor Cut Anchor Spring / Gravity Toggle Bolt Anchor Express Nail Anchor Strut Nut Hex Coupling Nut Eye Coupling Nut Stud Anchor Tie Wire Anchor Split Drive Anchor Self Drilling Anchor Steel Plug with Brass Nut
Made of Zinc Alloy
Made of Nylon / Plastic

Company Information

- About Us
- Contact Us

Back Home

Home > Online Catalogue > Made of Steel / Stainless Steel Anchor Fastener

Cut anchors are an improved expansion anchor with internal thread and a plug, and is the most popular anchor.

Anchor can be installed with hex bolt, stud and hookbolt, etc. After installation, concrete will not be effected in appearance as a rise on the surface.

The test values listed beneath were obtained using 200-250 kgs/cm² concrete(no aggregate). A safe working load should not exceed 25% of stated values.


Drill a hole	Use setting tool & hammer to drive plug in	Anchor is set with bolt

Cut Anchors Size (A)	Anchor DIA.(B)	Anchor Length (C)	Thread Length (D)	Bolt Thread Fit Length	Drill DIA (mm)	Pull out Load (Kgs)
M6 W1/4	11.0 (10.5)	30	9	8	11.1	980
M8 W5/16	12.0	35	12	10	12.1	1500
M10 W3/8	14.0	40	14	12	14.1	2100
M12 W1/2	17.5	52	20	16	17.6	3200
M16 W5/8	21.4	63	24	20	21.6	4300
M20 W3/4	25.4	83	31	25	25.6	5600
M22 W7/8	28.5	93	36	30	29.0	7000

Type D: used for rebar with thread or no thread.
The steel bar is customer-built.

Weld Style Cut Anchor

Cut Anchors Size (MM)	Anchor Length	Drill DIA(mm)	Pull out Load (Kgs)
10.0	40. 45. 50 55. 60. 70	10.5	1650
12.0	40. 45. 50 55. 60. 70	12.5	2450

Metric / inch size available
Stainless steel cut anchors and special length cut anchors available

Relative Anchors:
Single Expansion Anchors
Double Expansion Anchors